Goods for active rest

• GLASS FIBER PLASTIC BOATS

• GLASS FIBER OARS

• FISHING RODS AND SPININGS

• SKI-STICKS

• GYMNASTIC STICK

When designing and producing the boats we use the world leading produces’ experience and high-quality reinforcing materials, as well as resins. The body is made from high-strength glass fiber plastic and represents monocoque, which allows to provide a higher impact resistance in comparison with two-layer bodies. Glass-fiber plastic has the following advantageous characteristics: thermal conductivity, like wood; high endurance and long service life, like steel and also humidity resistance. The high quality protective-decorative coating saves you from having to paint or repair the boat every year.

The floodability of the boat is provided by two buoyancy blocks. When testing the equipment, a boat fully filled with water is loaded up to 40% of its carrying capacity and after this, the boat is left on the water surface. Also the boats are equipped with a water drain plug.

The design of LSPP-3 and LSPP-4 allows attaching an outboard motor.  

Safety Parameters are proved by the Certificate of the Official Inspection for Metrology and Standardizing of the Republic of Belarus

The oars are aimed for rowing on leisure boats in all weathers. The oar is non-dismountable, equipped with a rowlock and a rowlock support. The oar handle (fore-end) is hollow, light and smooth. The handle and the oar palm are manufactured from glass fiber plastic. The oar palm, because it has a corresponding configuration, allows making a stroke without a break in the beginning and in the final phase of the stroke. The reinforcement ribs of the oar palm guarantee its durability; the oar palm will not bend during the stroke and the push off.

These oars can be used in leisure boats with the carrying capacity of 500 kg.

Besides, there are different options for the delivery, according to the customer’s desire:

• the oar palm
• the fore-end of the oar
• an oar without rowlocks and without rowlock supports

FISHING RODS AND SPININGS

Glass fiber plastic telescopic floater fishing rods (for non-regulated rod types). Light firm and convenient for transporting, this model at once gained the fishing amateurs’ interest and today it is most useful for fishing.

Wire fishing rods (for regulated rod types) are equipped with coil holders, which allow to fix a coil of any type with by-pass rings, which help to evenly spread the pressure when taking out a fish. The fishing rods “Cascade-6” are made with plastic rings, the models “Cascade-Lux” and “Cascade-5” — with metal and ceramic fragments.

A new model of ski-sticks has been developed which differs from the previous ones not only by its stylish and up-to-date design but also by its technical characteristics. The new model is manufactured by pultrusion, which allows to lower the weight of the item, considerably increasing the durability features. This durability of this model, compared to the previous model, which was manufactured by winding the fabric, has become better by 20%.

Pleasure ski-sticks will be most useful for ski-touring amateurs. The outside surface has decorative frost-proof coating. The weight of one pair is from 150 to 250g.
Ski-sticks for children are noted for their small weight, strength, bright design and comfortable construction. They are for children of 5 to 12 years old. Length is from 80 to 120 сm.
At customer’s request the whole quantity in the consignment can be produced in some particular colour-grade and decorative style.

Selecting sticks for racing skis for children and grown-ups.
Racing sticks are selected either for “classics” or for “free style”, individually for each person, depending on their height. The length is normally defined as follows. For “classics” — your height minus 25-30 cm, and for “free style” — your height minus 15-20 cm. When you are standing up the sticks should go up to your arm pits, skating skis should be a bit higher than your shoulders.

Contact information:  

Marketing department

Sales department