Joint Stock Company «Polotsk-Steklovolokno» World experience in glass fiber production and products on glass fiber basis Rus 中國 日本の

Goods, applied in construction

 
GLASS FIBER PLASTIC FITTINGS 
 

JSC “Polotsk-Steklovolokno” offers glass fiber plastic fittings designed for application instead of traditional steel fittings.

 
 
 
 
 
  
The fittings are produced in the following types:
 
  • smooth (SPA-6);
  • with periodic profile(fittings with roving braiding).

Application:

1. Flexible connections:

  • For cast-in-place walls
  • For brickwork
  • For concrete sandwich-panels

2. Constructions and formations of the infructructure:

  • Road and airfield runways and fences.
  • Basements
  • Canalization, amelioration, water removal
  • Marine and port structures
  • Flooring and bridge enclosures

3. Concrete articles:

  • Illuminating supports, power transmission line supports, insulating traverse for power transmission lines
  • Road and pavement tiles, fence, borders, columns etc.
  • Railroad sleepers
  • Fabricated shapes for collectors, public systems

4. Concrete reservoirs and treatment facilities and chemical productions, the infrastructure of chemical productions.

The advantages of glass fiber plastic fittings in comparison to the steel ones:

  • Resistance to corrosion
  • Energy effectiveness (the “cold bridges” are not present)
  • Small weight
  • Simple mounting
  • High endurance characteristics
 

GLASS FIBER PLASTIC FITTINGS SPA-6

They are used as a means of flexible links for reinforcing brickwork.

They correspond to STB1103-98

They are produced with 6mm diameter, standard sizes are 400 mm, 450 mm, 500 mm, 540 мм, 625 mm.

They are complete with an anchor steel washer of 12mm diameter at 50 mm distance from the edge. The packing is packs of 100 pieces each.

If necessary they can be produced in any length, they can be complete with two washers at any distance from the edge or they can be delivered without washers..

 

GLASS FIBER PLASTIC FITTINGS WITH ROVING BRAIDING
 

They are designed for reinforcing concrete constructions, which are used in non-aggressive and slightly aggressive environments and also as a means of a binder in three-ply wall panels.

The fittings are manufactured with periodic profile with unidirectional parallel arrangement of the reinforcing filler by means of spiral braiding of the fittings with roving.

The fittings are manufactured in the form of a straight-line core of a certain length. The length of the core is established as agreed upon with the customer.

The fittings can be manufactured with 5 to 20 mm diameter.

Standard type size:

Diameter 7,5 mm, length 270mm, 220 mm, 310 mm, 430 mm.

It is possible to produce the fittings with restrictors (fixers): straight and inclined (at an angle 45°).

For concrete sandwich-panels 7,5-mm fittings are used, for monolithic building constructions — the diameter of the fittings will be from 8 to 20 mm.

 

ANGLE SECTION WITH REINFORCING GLASS FIBER MESH

Angle section with reinforcing mesh is used as a means of reinforcing element for plastering, for jacketing the outside walls of buildings and constructions.

It prevents splits in the rough coating on the building corners, it is an antivandal means, it simplifies, speeds up and enhances the quality of plastering work on the corners of buildings.

The angle section can be aluminium and PVC.

The length of the section is 2.5 м. The width of the mesh is 10 x 15 cm. It is packed in packs of 25 pieces and boxes of 100 pieces each 

Contact information: 

Marketing department

Sales department

Back to top